Fully Automatic 3-in-1 Water Bottle Rinsing, Fill | RFQ Sourcing Details

This fully automatic water bottling machine combines bottle rinsing, gravity filling and capping in a single rotary monoblock. It is offered for mineral water, purified water, flavored water and low-alcohol drinks.

The listed packaging formats include plastic, PET, aluminum and glass bottles, but buyers should confirm the exact container and closure configuration for their project. Available configurations include 12-12-5, 18-18-6, 24-24-8, 32-32-10, 40-40-12 and 50-50-12 washing, filling and capping head arrangements.

For 600 ml bottles, the corresponding stated production ranges extend from 2,000-4,000 bottles per hour to 20,000-24,000 bottles per hour. The broader listing also references capacities up to 40,000 bottles per hour, so the guaranteed output should be confirmed against the selected model, bottle format and line layout.

The machine uses bottle-neck handling through the rinser, filler and capper sections. Bottle infeed and transfer components include starwheels and bottle-jam protection.

The rinser uses a rotary SUS304 stainless-steel welded structure, neck-gripping bottle clamps and atomizing spray nozzles for cleaning the inner bottle wall. The filler uses a rotary SUS304 structure, SUS316L filling valves and a gravity-filling method.

The stated filling accuracy is 0.5%, while the listed filling flow can reach 200 ml per second. Buyers should request the test conditions and acceptance method for both figures.

The capping section includes a centrifugal cap-arranging system, reverse-cap controls, a photocell for detecting an empty cap chute and an inlet-bottle detection switch. Automatic operation from bottle infeed to discharge is controlled by a PLC.

The drive system is located beneath the machine table and uses a main motor with gear transmission and overload protection. Listed motor ratings range from 2.2 kW to 11 kW, depending on configuration. Listed machine weights include 2,500 kg, 3,500 kg and 4,500 kg, although weights are not provided for every model.

A package size of 2,830 × 2,760 × 2,950 cm and gross weight of 4,000 kg are also stated;these unusually large dimensions should be verified for the exact shipment before freight planning.

The monoblock can form part of a complete water production line incorporating water treatment, blow molding, bottle unscrambling, labeling, secondary packing and palletizing equipment.

The source lists 300 ml, 500 ml, 1 L, 1.5 L, 5 L, 3-gallon and 5-gallon bottles as suitable formats, but it does not establish that one machine configuration handles every size. Confirm the required change parts, container drawings, cap specification and achievable changeover procedure.

Before procurement, define the beverage, bottle material, bottle volume, neck finish, cap type and required hourly output.

Also confirm the exact model, included equipment, electrical standard, utilities, product- , control components, factory acceptance test, installation scope, spare-parts package, documentation and final packed dimensions.

A one-year warranty, one-year after-sales service and installation support are stated, but their detailed scope, exclusions and site responsibilities should be documented in the purchase agreement.