GDHP-398 Fully Automatic PLC+HMI Aerosol Can Fill | RFQ Sourcing Details

The GDHP-398 is a fully automatic linear production line for filling and packing aerosol cans.

Its listed process equipment covers can unscrambling, liquid filling, valve insertion, sealing and gas filling, weight inspection, water-bath leakage testing, ink-jet conveying and printing, actuator pressing, cap feeding and pressing, and final conveyor-table handling.

Control is specified as PLC+HMI, with Siemens identified as the electrical brand. Supported configuration and performance The liquid filler has three independently controlled pneumatic filling heads.

Each head is rated for 10–250 ml, with a stated total liquid filling range of 40–1,000 ml and throughput of 2,400–3,600 cans per hour. The listed filling precision is within ±1%. A no-can, no-fill function is also described.

The valve inserting station is specified for 1-inch valves and tube lengths from 0 to 250 mm, with a stated capacity of 2,400–3,600 cans per hour. The sealing and gas-filling station includes one sealing head, three gas-filling heads, two booster pumps and a gas storage tank with an energy accumulator.

Its stated range is 10–250 ml per filling head and 30–750 ml total, with filling precision within ±1% and output of 2,400–3,600 cans per hour. Inspection equipment includes an automatic weighing machine with a maximum weight of 3 kg, a configurable ±0.5 g allowance and a stated capacity of 2,400–2,700 cans per hour.

It is described as rejecting nonconforming products in two directions. The water-bath leakage tester has a stated temperature accuracy of ±1°C, 30 kW heating power, 1.4 m³ tank capacity, 3–5 minute soaking time and throughput of 3,000–4,200 cans per hour. An automatic drying device is included in its description.

Downstream equipment includes an ink-jet conveyor rated at 2,400 cans per hour, a printer with adjustable 0.5–110 mm font size, an automatic actuator presser rated at 3,600 BPH and an automatic capping machine rated at 3,600 BPH.

Both the actuator presser and capper are specified for AC 220 V, 50 Hz power and maximum air consumption of 0.6 m³/min at 0.6 MPa. Construction and shipment information The line is listed with SUS304 or 316L material options and wooden-case packaging.

The stated shipment size is 450 × 165 × 185 cm with a gross weight of 1,500 kg. These figures should be confirmed against the final line layout because the described system contains multiple stations. Customization is stated as available, and the listed warranty period is one year.

Procurement questions to confirm Before ordering, the buyer should provide the aerosol formulation, required liquid and gas fill volumes, can dimensions, valve specification, dip-tube length, actuator and cap formats, target hourly output, site voltage, altitude and available compressed-air supply.

Confirm which stations are included in the quoted configuration, the final equipment footprint, utility load, wetted-part material, changeover requirements and whether the requested formulation is suitable for the proposed filling method.

The source recommends a dedicated filling room to improve safety and reduce explosion risk. Buyers should therefore require a site-specific safety review and confirm hazardous-area classification, ventilation, gas detection, fire protection, electrical protection and applicable local rules before installation.

Also confirm the acceptance test method, allowable fill-weight variation, leak-test temperature and dwell time, rejection logic, documentation package, installation responsibilities, operator training, spare parts and delivery schedule in the purchase agreement.