Guan. He Fully Automatic 4-Head Juice and Viscous | RFQ Sourcing Details

Product overview This fully automatic bottling line is configured for juice and other liquid or viscous products within a stated filling range of 240–500 g. Its listed operating sequence covers bottle feeding, four-nozzle piston filling, screw-cap application, aluminum-foil induction sealing, and sleeve labeling.

The line is rated at 25 bottles per minute, while actual production should be confirmed using the buyer’s product, container, closure, and label.

Listed line configuration The system includes a rotary bottle table, a four-head servo filling machine, an automatic capping machine, an electromagnetic induction foil sealer, and an automatic sleeve labeling machine. The bottle table transfers containers from its rotating surface to the conveyor.

The filling machine uses a stainless-steel plunger-style metering pump and pneumatic-control valves, with anti-drip and back-suction functions. Its listed controls include PLC operation, a touchscreen, frequency conversion, automatic material feeding through a liquid-level switch, and a no-bottle/no-fill function.

The capping station is intended for screw caps and is described as requiring manual cap loading. The foil-sealing station uses electromagnetic induction with water cooling and is designed to connect with filling, capping, and labeling equipment.

The sleeve labeler supports round, square, flat, and curved bottle forms within its stated dimensional limits and includes a steam-heated shrinking tunnel.

Supported operating data The filling machine has four nozzles, a stated 240–500 g range, ±1% filling accuracy, 25 BPM speed, and a 0.4–0.6 MPa air-pressure requirement. The overall line is listed as electrically driven, PLC controlled, and fully automatic.

SUS304 is specified for several line components;the general listing also references SUS304 or 316L, so the exact material supplied for every product- . Procurement questions to confirm Before ordering, provide representative bottles, caps, foil liners, sleeve labels, and product samples for a line trial.

Confirm the required fill weight and whether the product’s viscosity, temperature, particulates, foaming behavior, or sanitation needs are compatible with the proposed pump and valve arrangement.

Request a written machine-by-machine specification because the listed stations have different voltage, power, air-pressure, container-size, and throughput values.

The buyer should also confirm the final cap-feeding method, cap dimensions, foil-sealing diameter, bottle dimensions, conveyor interfaces, label material, shrinking conditions, and required change parts. Verify which components are SUS304 and which, if any, are SUS316L, especially for all product- .

Ask for an acceptance test based on the actual container and product, including sustained line speed, filling accuracy, sealing integrity, cap quality, label placement, cleaning procedure, utilities, safety guarding, spare parts, manuals, installation responsibilities, and after-sales terms.