Hard Walnut Black Walnut Almond Nuts Shell Breake | RFQ Sourcing Details

--Walnut Shell Breaker Palm Nut Almond Sheller Dehuller Cracker Breaker Walnut shelling machine is mainly used for hard shelling of walnuts. Different varieties of walnuts have different yields and integrity rates of nuts.

One is to adjust the speed of the motor so that the speed and internal wind force are appropriate. The other is to achieve the shelling effect by adjusting the internal clearance. The upper part of the machine is fed, and the inner part of the machine is shelled and discharged.

The sorting requirements for processed walnuts are not high, and the preliminary screened hickory can be processed;Adopt the principle of mechanical eccentric shaft to break the shell instantly;The equipment is suitable for different varieties of walnuts.

Mechanized production mode is adopted in the whole food processing process, which reduces the possibility of workers directly touching the processed food raw materials and avoids the secondary pollution in the processing process.

Walnut shelling machine is a kind of machine that can complete walnut shelling with one feeding. Walnut kernels come out directly after preliminary wind selection, fan vibration, layered separation, re threshing and cleaning.

The structure of three roll mixed shelling is adopted, which can be used for secondary shelling. There is no walnut kernel in the walnut shell, but there will be less than 15% of the walnut kernel.

There are three motors on the walnut skin machine, respectively (the shell breaking motor is 2.2 kW, the sorting motor is 200 W, and the fan is 300 W) --Machine Parameters Shell breaking motor 2.2 kW Sorting motor 200W Fan 300w Model SL HT200F Specification 980 * 700 * 1300mm Efficiency 200kg/h Voltage 220V Power 2.7 kW (three motors) Decontamination rate ≥ 80% Whole kernel rate ≥ 70% (Tousan Road) --Instructions Walnut sheller structure: Walnut shelling machine is composed of frame, rotor, motor, fan, screen, feeding hopper, V-belt pulley and its transmission V-belt.

After normal operation of the machine, put the walnuts into the feed hopper evenly and continuously, and the walnuts will be broken under the repeated blows, rubs and collisions of the rotor Under the rotating wind pressure and blow of the rotor, the broken shell is separated from the large mesh screen through a sieve with a certain aperture, and the screened small peel fruit is replaced with a small mesh sc