Thermoforming Vacuum Packaging Machine for Whole | RFQ Sourcing Details

Automatic Thermoforming Vacuum Packaging Machine Thermoforming vacuum packaging machine is an advanced packaging equipment that first heats the film to soften it, and then stamps it into the shape of the desired container through a forming mold, forming the lower film cavity of the packaging container.

Subsequently, the packaging is loaded into the formed lower film and finally subjected to vacuum treatment to complete the sealing process. Widely used in leather bags for various snacks, meat, medical products, hardware, medical equipment and other products.

It adopts detachable molds, allowing a single machine to meet molds of different sizes. It is equipped with a waste film recycling device to ensure a healthy environment. It is used in conjunction with sensors to achieve precise positioning. Can be used for disappearing film or colored film packaging.

Name Specifications Model No. DRZ320 DRZ420 DRZ520 Top film width (mm) Bottom film width(mm) Power supply 380V,50HZ,3.

Phase,or customize Vacuum pump 1*63;1*160 1*63;1*200 1*63;1*200 Packaging speed(cycle/minute) Total power 13 15 18 Weight(KG) About 1900 About 2100 About 2300 Dimension 6000*850* *950* *1050*1800 packaging samples Product show After forming, the packaging chamber is moved to the product placement position, and the product is placed into the chamber automatically or manually.

Then, the packaging chamber enters the vacuum packaging area. Here, the sealing device seals the packaging chamber, leaving only one exhaust port. The vacuum pump starts working to extract the air from the packaging chamber.

As the air is drawn out, the pressure inside the chamber gradually decreases, usually dropping to between tens and hundreds of pascals, thus achieving a vacuum state. Set up vacuum channels below or around the mold.

When the softened film is covered on the mold, the air between the mold and the film is extracted through an exhaust device to form a vacuum. Under the action of external atmospheric pressure, the film is tightly adhered to the surface of the mold, forming a cavity with the same shape as the mold.

For example, when packaging block shaped food, the film will be sucked into a shape that fits the bottom of the food, providing a customized storage space for the product. In the stretch film vacuum pac