Automatic 3–10 L Water Rinsing, Filling and Cappi | RFQ Sourcing Details

This automatic bottling line is designed to rinse, fill and cap 3–10 L plastic water bottles. The listed applications include still water, pure water, reverse-osmosis water, mineral water and sparkling water. Round, square and flat bottles are stated as supported, with screw, press and sport-cap options.

Supported equipment details Empty bottles enter the rinsing section from a conveyor. Pneumatic mechanisms grip and invert each bottle, and a pump sprays pure water into it. The described rinsing sequence specifies a 30-second spray period before the bottle is returned to the conveyor.

Washed bottles then move to the filling station, where they are positioned for gravity filling before being discharged to the capping section. The capping station uses capping heads and an air-cylinder-driven operating sequence. The equipment is listed as automatic, electrically driven and rated at 4.5 kW.

Its stated construction material is SS304. Controls may include a Mitsubishi or Omron PLC and inverter, a Mitsubishi, Thinget or Weinview touch screen, an AUTONICS photoelectric controller and Airtac pneumatic components.

The listed machine specification is 2850 × 2450 × 2600 mm, and the transport package is a wooden case. The configuration table provides capacities of 500, 750, 1,000, 1,200, 2,000, 3,000 and 4,000 bottles per hour, measured with 5 L bottles.

These outputs correspond to different combinations of rinsing, filling and capping heads. A separate specification states a general filling-speed range of 1,000–5,000 bottles per hour, so buyers should obtain a configuration-specific capacity commitment for their bottle and cap format.

Procurement questions to confirm Before ordering, confirm the exact machine model and whether the proposed system is a single combined monoblock or a conveyor-linked arrangement of rinsing, filling and capping stations.

Ask for the guaranteed output using your actual bottle volume, bottle geometry, cap type and water product. Confirm whether sparkling water requires a different filling configuration from the stated gravity-filling system.

Also verify the final electrical voltage, control-component brands, number of processing heads, utilities, conveyor scope and required installation footprint.

Request approved bottle and cap samples or format drawings, a complete line layout, acceptance-test criteria, change-part requirements and an itemized list of included equipment.

The stated warranty is one year with online after-sales service, but buyers should confirm coverage, exclusions, spare-parts scope, installation responsibilities and the service arrangement in the purchase contract.