Automatic 3–5 Gallon Barreled Water Washing, Fill | RFQ Sourcing Details

This automatic barreled-water production line combines washing, filling and capping functions for 3–5 gallon plastic containers. The listed process includes pre-washing, draining, recycled-water washing, disinfection, finished-water rinsing and final draining. It then fills, caps, counts and discharges the containers.

An automatic cap-settling and cap-conveying system is included in the described configuration. The equipment uses a multi-head, pressure-type filling arrangement with intermittent gear-wheel and rack transmission.

Listed models range from QGF-120 through QGF-1200, with nominal capacity bands from 60–120 to 900–1,200 barrels per hour. Filling-head counts increase by model from one to eight.

The stated barrel format is 3–5 gallons, with a listed reference size of approxima;another technical entry gives 276 × 490 with an unclear unit transcription. The line is described as integrating mechanical, electrical and pneumatic systems.

Stainless steel is specified for the equipment, while the basic-information table separa alve, are listed as Z304 stainless steel. Because these material statements are not fully aligned, buyers should obtain a component-level material schedule before ordering. Utilities vary by model and configuration.

The model table lists motor power from 1.5 to 13.5 kW, air pressure from 0.4–0.6 MPa depending on model, and air consumption from 0.37 to 1.8 m³/min.

A separate technical section states maximum consumption of 4 kW plus 9 kW for heating, working consumption of 3.5 kW, filling-water use of 9 t/h and purified washing-water use of 2.25 t/h. These figures may refer to a particular configuration and should be confirmed against the selected model.

Control-component descriptions also differ: the basic information identifies Siemens PLC control, while the detailed description and parts list identify a Mitsubishi microcomputer or PLC and Siemens electrical elements.

Buyers should therefore request the final electrical bill of materials, control architecture and approved component brands for the exact machine offered.

Before procurement, confirm the required hourly output, barrel dimensions and neck finish, cap format, water-treatment interface, electrical supply, heating arrangement, air and water requirements, line footprint, included modules, and final packing dimensions.

Also request an acceptance test protocol that covers washing stages, filling accuracy, cap placement, output rate and operation with the buyer’s actual containers.

Customization is stated as available, and the listed warranty period is 24 months, but its scope and start date should be documented in the purchase agreement.